MAC Aura XIP wash light with smart outdoor protection and aura filaments

• 6,000 lumens RGBW light output
• High narrow intensity: 360,000 cd
• Pixelated Beam: 7x 60W RGBW LEDs
• Filament Aura: 12x 4W RGBW LEDs
• Fully calibrated using Martin's Full Gamut Color Calibration
• Flicker-Free operation – LED driver frequency suitable for all kinds of camera applications
• LED Driver frequency adjustable for demanding applications

• Tight beam and beautiful wash field
• 6.3 – 50.4˚ zoom – Precise, silent and fast zoom
• Even soft edge wash field with zero hotspot
• High intensity mid-air beams
• Minimal stray light
• Minor color temperature shift from center to edge

• Creates an even softer edge wash field
• Minimal impact to Aura filament effects
• Attaches to front of fixture
• Can remain attached to fixture inside flightcase SiP

• RGBW color mixing with very bright and vibrant saturated colors, as well as soft pastels and white tones
• Calibrated and Extended Color Modes
• Calibrated CTC control: 1,000 – 12,850 K
• Green Magenta Shift (Tint) Control
• Tungsten Emulation Option
• Virtual Color Wheel

• More than 200 built-in FX macros with control of foreground color, background color, speed and direction
• P3 video mapping of fixture Beam pixels and/or Aura filaments
• P3 Mix allowing crossfade between video looks and DMX looks
• High-speed pan, tilt and zoom

• Ultra-quiet cooling system
• Theater / Broadcast mode at just 25.2 dB(A)
• Low noise pan/tilt and effects operation

• Smart outdoor rating for any weather condition
• Weight 8.95 kg (19.73 lbs.)
• Dimensions: 338 x 380 x 226 mm

• Battery-powered control panel on the base
• DMX in & thru
• Ethernet in & thru, supporting Art-Net, sACN & Martin P3
• Fail-safe bypass on Ethernet ports
• RDM over DMX and RDM over Art-Net

Martin Lighting Worldwide Launch Event RecordingMAC Aura XIP Indoor Outdoor Wash Light		Martin Lighting Product Overview MAC Aura XIP IndoorOutdoor Wash Light

Width (across yoke): 338 mm (13.31 in.)
Width (base): 306 mm (12.05 in.)
Height (head straight up): 380 mm (14.96 in.)
Height (maximum): 421 mm (16.57 in.)
Depth (head): 205 mm (8.07 in.)
Depth (base): 226 mm (8.90 in.)
Minimum center-to-center distance in side-by-side installation: 350 mm (13.78 in.)
Weight: 8.95 kg (19.73 lbs)

Beam Dimmer/Shutter: 0 - 100% continuous dimming, regular and random strobe, instant open and blackout
Beam Dimming options: Choice of four dimming curves
Beam Color Mixing: RGB, independently variable 0 - 100%
Beam Color Temperature Control: Variable 1,000 – 12,850 K
Beam Tint Control: Variable green-magenta shift
Beam Virtual Color wheel: 48 color presets, continuous rotation & random color
Zoom: Motorized with 1:6 zoom ratio
Pan: Motorized 540°
Tilt: Motorized 220°
Beam PixelMapping: individual RGB control of each of the 7 Beam pixels
Beam P3 Mix: Videomapping of fixture with variable crossfade between DMX control and video control
Aura Dimmer/Shutter: 0 – 100% continuous dimming, regular and random strobe effects, instant open and blackout
Aura Dimming options: Choice of four dimming curves
Aura Color Mixing: RGB, independently variable 0 - 100%
Aura Color Temperature Control: Variable 1,000 – 12,850 K
Aura Tint Control: Variable green-magenta shift
Aura Virtual Color wheel: 48 color presets, continuous rotation & random color
Aura PixelMapping: individual RGB control of each of the 12 Aura filaments
Aura P3 Mix: Videomapping of fixture with variable crossfade between DMX control and video control
Pre-programmed effects: Two ranges of FX on Beam, Aura or Combination; independent or synchronized/combined
LED Frequency control: Variable LED PWM control

Control Protocols: DMX, RDM, Art-Net, RDM over Art-Net, sACN and P3
Protocol Detection: Automatic
DMX Modes: Compact, Basic, Extended & Ludicrous
DMX Channels: 20, 36, 57 & 93
16-bit Controllable Parameters: Beam & Aura Dimming, Beam Color Mixing, Zoom, Pan and Tilt
Setting and Addressing: Display Menu, RDM, RDM over Art-Net or P3
Local User Interface: Backlit LCD Display with battery-powered operation
Fixture identification: User-settable ID number
DMX Compliance: USITT DMX512-A
RDM Compliance: ANSI/ESTA E1.20
Art-Net Compliance: Art-Net 1, 2, 3 and 4; including RDM over Art-Net
sACN Compliance: ANSI E1.31 - 2016
Martin P3 Compliance: P3 System Controller Software 5.1.0 or newer
DMX/RDM Transceiver: Galvanic-isolated RS-485
Ethernet Transceiver: 10/100Mbit (with fail-safe bypass)
Firmware Update: via USB type C memory device, via DMX using Martin Companion or via Ethernet using P3 System Controller

Front Lens Diameter: 196 mm (7.72 in.)
Zoom Range: 1:6
Full Zoom Range at Half Peak (Beam Angle): 6.3° - 35.3°
Full Zoom Range at Tenth Peak (Field Angle): 8.8° - 50.4°
Beam Light Source: 7 x 60 W RGBW LED
Aura Light Source: 12 x 4 W RGBW LED
Max. Total Beam LED Engine Power: 296.5 W
Max. Total Aura LED Engine Power: 35.1 W
Minimum LED lifetime: > 50.000 hours (to > 70% luminous output)*
*Figure obtained under manufacturer's test conditions

Light Engine Luminous Output: 11,000 lumens
Fixture Luminous Output Wide: 6,000 lumens
Fixture Luminous Output Narrow: 4,500 lumens
Peak Luminous Intensity Narrow: 360,000 cd
CCT: Variable 1,000 K – 12,850 K (+/- 200 K)
CRI (Color Rendering Index) high output mode: ≥ 71
CRI (Color Rendering Index) high quality mode: ≥ TBC
CQS (Color Quality Scale) high output mode: ≥ 80
CQS (Color Quality Scale) high quality mode: ≥ TBC
TM-30 Rf (IES TM-30-15 Fidelity Index) high output mode: ≥ 78
TM-30 Rf (IES TM-30-15 Fidelity Index) high quality mode: ≥ TBC
TM-30 Rg (IES TM-30-15 Gamut Index) high output mode: ≥ 117
TM-30 Rg (IES TM-30-15 Gamut Index) high quality mode: ≥ TBC
TLCI (Television Lighting Consistency Index) high output mode: ≥ 57
TLCI (Television Lighting Consistency Index) high quality mode: ≥ TBC
Beam LED Refresh Rate: variable 2,400 Hz - 3,000 Hz and 24,000 Hz mode
Aura LED Refresh Rate: 1,200 Hz
Binning: Tight color and flux binning
Calibration: Full Gamut Color Calibration of Beam and Aura
Color Modes: Extended Color Mode and Calibrated Color Mode
* All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient

• Housing: High-impact flame-retardant thermoplasticColor: BlackProtection rating: IP44
• INSTALLATION
• Mounting points: 2 pairs of 1/4-turn points for 106 mm (4.17 in.) center-to-center omega brackets and single M12 threaded hole for rigging clampLocation: Indoor or Temporary Outdoor useOrientation: Any, except with display facing upwards in outdoor applicationMinimum distance to combustible materials: 0.2 m (7.87 in.)Minimum distance to illuminated surfaces: 1.0 m (39.37 in.)
  CONNECTIONS
• Firmware from flash memory: USB 2.0 type C portAC mains power in/thru: Neutrik powerCON TRUE1 TOPDMX and RDM data in/thru: Neutrik 5-pin locking XLR TOPEthernet (Art-Net, sACN and P3) in/thru, including fail-safe bypass: Neutrik etherCON TOP
  ELECTRICAL
• power: 100-240 V AC nominal, 50/60 HzPower supply unit: Auto-ranging electronic switch modeMaximum total power consumption: 340 WMaximum total current at 100-120V: 3.9 AMaximum total current at 200-240V: 1.8 ATypical half-cycle RMS inrush current at 230 V, 50 Hz: 7.0 ATypical earth-leakage current: 0.431 mAPower consumption, all effects static, zero light output: 48 W
• TYPICAL POWER AND CURRENT100 V, 60 Hz: 285 W, 2.9 A, PF 0.99120 V, 60 Hz: 285 W, 2.4 A, PF 0.99208 V, 60 Hz: 285 W, 1.4 A, PF 0.97230 V, 50 Hz: 285 W, 1.3 A, PF 0.97240 V, 50 Hz: 285 W, 1.2 A, PF 0.97Measurements made at nominal voltage with all effects active and LEDs at full intensity. Allow for a deviation of +/- 10%.
  PF = power factor
  THERMALCooling: Forced air (temperature regulated, low noise, user-definable levels)Maximum ambient temperature (Ta max.): 40° C (104° F)Minimum ambient temperature (Ta min.): 5° C (41° F)Maximum surface temperature, steady state, at 40° C ambient: 60° C (140° F)Total heat dissipation (calculated, +/- 10%): 972 BTU/hr.
  ACOUSTIC DATA
• Sound Pressure Level (LpA) @ 1 m (default regulated fan mode, full output): 34.4 dB(A)Sound Pressure Level (LpA) @ 1 m (constant fan mode ultra low): 25.2 dB(A)
  ENVIRONMENTAL
• RoHS: CompliantREACH: CompliantWEEE: CompliantProposition 65: Compliant
  APPROVALSGlobal CB Certification/IECEE: IEC 60598-2-17 (IEC 60598-1)EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493EU EMC: EN 55015; EN 55032; EN 55035; EN 61547; EN 61000-3-3US safety: UL 1573US EMC: FCC Part 15 Class BCanadian safety: CSA C22.2 No. 166Canadian EMC: ICES-003 Class B, ICES-005 Class BAustralia/NZ: RCMUnited Kingdom: UKCA
  INCLUDED ITEMSTwo omega brackets with 1/4 turn fasteners for rigging clamp attachment
  SoftLens
  Multi-Language Safety and Installation Manual
  RELATED ITEMSMartin Companion Cable (for firmware update over DMX): P/N 91616091Martin Companion Software (for firmware update over DMX): Free download from www.martin.com
  ACCESSORIES
• Transport and Storage
  Flightcase for 6 x MAC Aura XIP: P/N MAR-91515057
  Additional dual SiP Foam Flightcase Insert for MAC Aura XIP: P/N MAR-91611861HU
• Consumables
  CR123A 3-volt lithium battery: P/N 05801011
• Power Input Cables
  Power Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1 NAC3FX-W TOP (female), 1.5 m (4.9 ft.) P/N 91611797
  Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W TOP (female), 1.5 m (4.9 ft.) P/N 91610173
• Power Linking Cables
  Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91611796
  Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91610172
• Power Connectors
  Cable Connector, Neutrik powerCON TRUE1 TOP Female: P/N 91611789HU
  Cable Connector, Neutrik PowerCON TRUE1 TOP Male: P/N 91611788HU
• Installation Hardware
  G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003
  Quick Trigger Clamp (suspension with fixture hanging vertically downwards only): P/N 91602007
  Half-coupler Clamp: P/N 91602005
  Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
  Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007
  ORDERING INFORMATIONMAC Aura XIP in EPS (in cardboard box, polystyrene packaging): P/N MAR-90250100HUMAC Aura XIP in dual SiP (in cardboard box with dual SiP foam flight case insert): P/N MAR-90250105HUMAC Aura XIP white in EPS (in cardboard box, polystyrene packaging): P/N MAR-90250110HU